Chemicals
Surface preparation for coating
The painting industry has very specific requirements. Experience in this area is priceless. Noyen specialists have been supplying solutions for surface preparation before painting for 20 years. One of the key features of coating industry is high variety of contaminants and cleaned materials. The effects of good surface preparation are visible immediately, therefore it is very important for the cleaning process to be of the highest quality.
Noyen P05
Used for:
- manual cleaning
- immersion cleaning
- ultrasound cleaning
- spray cleaning
- 0,5 – 3%
Working concentration
- 45 – 60°C
Bath temperature range
Noyen P05 is meant for cleaning and iron phosphating of steel, aluminium and zinc surfaces with the spray method. It results in amorphous phosphate coat. The thickness of the coat according to the PN-EN ISO 3892:1997 norm is 0,2-0,4g/m². The product prevents corrosion and improves adhesion of paint or varnish.
Noyen P05 provides
- Surface preparation before powder painting
- Surface preparation before water-based painting
- Surface preparation before solvent-based painting
- Corrosion protection
Advantages Noyen P05
-
Concentrated
-
Single step cleaning-phosphating
-
Does not contain harmful substances
-
Non-flammable
-
Does not contain volatile organic compounds
-
Effective in low concentration
Nothing is impossible.
It will be easier if you just tell us everything. Save your time and make use of your free consultation. Our expert will advise you for free.