Surface preparation for coating

The painting industry has very specific requirements. Experience in this area is priceless. Noyen specialists have been supplying solutions for surface preparation before painting for 20 years. One of the key features of coating industry is high variety of contaminants and cleaned materials. The effects of good surface preparation are visible immediately, therefore it is very important for the cleaning process to be of the highest quality.

NOYEN - logo marki NOYEN

Noyen P03

Used for:

  • immersion cleaning
PO3 NOYEN 30 KG jednoskładnikowy preparat do mycia i fosforanowania metodą zanurzeniową w niebieskim kanistrze
  • 0,5 – 3%

    Working concentration

  • 45 – 60°C

    Bath temperature range

Noyen P03 is meant for cleaning and iron phosphating of steel, aluminium and zinc surfaces. It results in amorphous phosphate coat. The thickness of the coat according to the PN-EN ISO 3892:1997 norm is 0,2-0,4g/m². The product prevents corrosion and improves adhesion of paint or varnish. The phosphating process can be complemented with products for cleaning, activation and corrosion removal, e.g. Noyen P11, Noyen AL, Noyen 22.

Noyen P03 provides

  • Surface preparation before powder painting
  • Surface preparation before water-based painting
  • Surface preparation before solvent-based painting
  • Corrosion protection

Advantages Noyen P03

  • Concentrated

  • Single step cleaning-phosphating

  • Does not contain harmful substances

  • Non-flammable

  • Does not contain volatile organic compounds

  • Effective in low concentration

Nothing is impossible.

It will be easier if you just tell us everything. Save your time and make use of your free consultation. Our expert will advise you for free.

Borg Automotive
Phoenix Contact
Thoni Alutec